Other Driving Accessories

Call or FAX Orders Now!

Ph: 1-910-814-0425 Fax: 1-910-814-2716

Be sure to leave a real street address on all orders, No P.O. Boxes! 

#105 Park Brake Extension

• For cars with foot operated parking brake
• Allows you to operate parking brake with your hand
• Price Per Unit: $85.00 & $20.00 shipping

#103 Accelerator Shield

• Prevents accidental acceleration during leg spasms
• Provides a convenient place to rest your right foot while using the #104 left foot gas pedal or the #100 - SuperGrade IV Hand Controls!
• Price Per Unit: $112.00 & $19.00 shipping

#106 Turn Signal Adapter

• Allows turn signals to be used with the right hand
• Essential accessory when right hand access is necessary
• Mounts easily with provided tools
• MAX DIAMETER IT WILL FIT .812 OF AN INCH

$69.00 and $14.00 shipping

#107 Gear Shift Adapter

• Allows column mounted gear shift to be used with the left hand
• Essential accessory when left hand access is necessary
• Mounts easily with provided tools

$70.00 and $17.00 shipping.

#119 Quad Gearshift Extension.

•  Gives more leverage to those with limited strength      $63.00 and $10.00 shipping. 

#HB1 HANDYBAR 

$39.95 and $10.00 shipping. 

Heavy gauge steel construction. Relentless crash sled testing. Meeting and exceeding every industry requirement.

All part of what makes EZ Lock a true leader in long-lasting durability. And security.

Once our base lock is mounted to the vehicle floor, it acts as receiver for the docking pin attached to the wheelchair, making your entry fully automatic, and minimizing the need for precise maneuvering.

PRODUCTS:

The BL-6290 Base Lock: The Heart of the EZ LOCK System. >

• Casing is sturdy 3/16" powder coated steel
• Locking Jaws are 1/4" steel coated with a permanently bonded lubricant
• Entry into lock is mechanical, and release is attained by an electrical pull solenoid
• Emergency mechanical release is also incorporated (in case the vehicle loses battery power)
• The base lock is mounted to the vehicle floor and acts as a receiver for the interfacing pin mounted to the wheelchair

The Wheelchair Bracket:

• The interface bracket is mounted to the wheelchair allowing it to lock into the BL-6290 docking base
• The EZ Lock system can accommodate a wide array of wheelchair styles, including both manual and power wheelchairs 
• Although we provide an interface for most of the wheelchairs currently on today's market, it is advisable to check with EZ LOCK, or your local adaptive equipment dealer, to ensure we have a system appropriate for your particular wheelchair
• When consulting your dealer about availability it's helpful to have a) name of the manufacturer, b) wheelchair model, c) model number, and d) note of any accessories that might interfere with the bracket installation (i.e. reclining or elevating seat, vent tray etc)

The ECU-3 Control Panel : The Main User Interface for EZ LOCK System:

• Functions include release, alarm buzzer deactivation for unoccupied use, and an array of warning indicators
• Green light signifies locking jaws are completely closed and system is safe to use
• Yellow light means locking jaws are not completely closed, and the user should exit, then re-enter base lock
• Red light indicates system has been de-activated, and is for unoccupied use only

The picture to the left illustrates the wheelchair bracket applied to a standard manual wheelchair. The application pictured also includes the front stabilizer, required for all drivers. The stabilizer is designed to minimize any tipping or side-to-side motion. The EZ Lock system is used for both manual and power wheelchairs, and is suitable for both drivers and passengers.

EMAIL US FOR INFO!

#128T Telescopic Hold Down

• Telescopic Hold down (1 point)

• D-Ring plate is mounted to floor.

• Set bar on chair frame.

• Put J-Hook into D-Ring and spin wingnut down to hold chair to floor.

• For vans and motorhomes.

Unit price $225.00 and $22.00 shipping.

#128 Electric Hold Down.

• May be installed for the driver or passenger wheelchair position (installation depends on underside of van)

• Full size vans only!

• To operate, a switch mounts to dash or most convenient position for operator.

• The hold down raises and lowers to hold wheelchair in place.

Unit price $585.00 and $38.00 shipping.

Scooter Station™ 

Play it safe...with the only powered lock-down available to secure your unoccupied scooter of its kind - secures scooters in transit and will also accommodate many wheelchairs.

One of your greatest concerns is knowing you will not have a 200-pound scooter moving around inside your vehicle as you drive. It was designed with your concerns in mind.

You can back into the Scooter Station™ without guessing if you are on the mark & secures quick and easy.

It is designed for quick and easy installation by your mobility equipment dealer.

Scooter not included!

The Scooter Station™ uses no awkward or unsightly attachments on your scooter. This is better for you because hardware attached to your scooter frequently gets stuck on ramps and thresholds.

It is electronically powered and does all the work with just the touch of a push-button. There are no more cumbersome belts. One-touch lock/unlock makes it easy to use.

The Scooter Station™ stabilizes your scooter securely without damage to your tires or modification to your scooter.

The Scooter Station™ will fit in minivans, full size vans and even in the bed of pick-up trucks.

When you have considered your safety options, we are sure you and your mobility equipment dealer will agree the Scooter Station™ is the best choice!

#126 Wheelchair Seatbelt Hold Down.

• Extra long seatbelt come up from the floor, wrap around the armrest, and in front of the person, to hold the chair to the floor, aluminum angles are mounted in front and in back of the large wheels to keep the chair from rocking.

• #127 WHEELWELLS (shown in photo) to be used with #126 in place of angles

• Wheelwells sink your back wheels approximately 1 1/2 to 2 inches into the floorfor more clearance and stability.

Unit Price #126 $95.00 and $20.00 shipping

Unit price #127 $225.00 and $18.00 shipping.

#116 Quad Key Turners

• Available in 4" or 8".

• For ignition and Doors, especially if you have limited wrist strength or movement.

Unit Price 4" $16.00 and $9.00 shipping

Unit Price 8" $20.00 and $9.00 shipping.

Car Entry/Exit Slide.

OVERVIEW

Amputee Ring Device

* Meets or exceeds VA specifications
*For use with hooks
*For driver with prosthetic hook on steering arm.
* Prosthesis should have soft surface pinchers (neoprene, etc.).

The amputee ring accommodates most drivers with a prosthetic hook on their steering arm(s) (typical with two fingers). One finger goes on the outside of the ring, the other finger fits on the inside, securing you to the steering wheel for smooth handling. Made of durable steel. The amputee ring can be placed on most locations on the wheel. The prosthesis should have soft surface pincers.  

 Steering Control Knob or Ball

* Meets or exceeds VA specifications
*For driver with full use of steering hand and arm.
*Commonly used with standard hand control.

For positive one hand control of the steering wheel.  The spinner knob remains in a fixed position via two support straps stemming from a fixed base which is attached to the steering wheel. Our most popular steering control, the ball-grip presses firmly against the palm of your hand, giving you added strength and control for easy driving. For instance, your installer can choose the handle angle to suit your preference. The base's position along the inside of the steering wheel is adjustable according to the individual's abilities. If you are tall, it can be angled around your leg so that you can reach full acceleration. If you have difficulty reaching the turn signal. The handle easily adjusts closer to the turn signal lever.

Triple Pin (Tri-pin) Quad Steering Device

* Meets or exceeds VA specifications
*For hands without tensor control.
* Grasps at the wrists and resists efforts of the hand to pull out.
* However hand can lift up and out at any time.
* The is no strapping of the hand

This steering device is for drivers with no grip and/or diminished wrist stability. The tri-pin is firmly supported by a secured base located along the inside of the steering wheel. Each pin is covered with foam to provide the driver with maximum comfort and the foam is easily replaceable. Your hand and wrist are comfortably secure with this lightweight three-pin grip. The pins are fully adjustable, so you can easily find your individual comfort setting. Also available is a counter weight that takes away the Tri-pin Grip's weight, so you can mount it on the either side of your steering wheel.

 Steering Control V-Grip

* Meets or exceeds VA specifications
*Adjustable for hand thickness
* Requires reasonable amount of tensor control.
* Includes three tie-down straps

The v-grip steering device is for drivers with minimum grip, stabilizes the driving hand securely. Secured base is also adjustable according to individual abilities. With a foam-grip single pin and foam-covered aluminum wrap providing backhand support, your hand stays securely and comfortable in place. You can easily adjust the single pin to find the steering grip that is just right for you. Easily replaceable foam cover for comfort.

Palm Grip aka Steering Cuff or Splint
Quad Steering Device

* Meets or exceeds VA specifications
*For hands with moderate tensor control.
* Operates as the hand is held in place by a cuff.
* Fastened with Velcro.
* Offers complete support and control for a driver with a totally disabled hand and wrist.

This steering device is for drivers with no grip and/or diminished wrist stability.

A wrist cock up splint with a post attached in a vertical or horizontal position. It is ideal for persons either lacking hand and wrist function or those unable to use the above steering devices.

Can be placed at any position on the wheel according to driving prescription and personal comfort. Comes with soft insert.

A lockable short rod is placed in the base of the steering wheel near the palm of the hand to allow the person to steer.

#121 Column Mount Brackets.

• One of these my be needed on some vehicles where normal mounting is impossible, because of dash interference.

• This bracket mounts onto existing holes under your dash.

• Then the control mounts onto the bracket.

• Please Specify Degree of Bracket needed!

• E-MAIL US THE DEGREE OF BRACKET YOU NEED OR MAKE AND MODEL OF YOUR AUTO AFTER ORDERING!

Unit Price $38.00 and $12.00 shipping

#118 Special Breke Bracket

• Needed for some vehicles where steering column interferes with normal brake bracket.

Unit Price $38.00 and $12.00 shipping.

After placing any order E-mail your phone # for shipping purposes.